Air Pump Blower
Basic Info
Model No.: HLSR150
Product Description
Stainless Steel Roots Blower for Process Gas
Products Introduction
The main characteristics of these blowers are as follows:
●Gases and vapors can be handled
●No sliding parts, therefore no wear
●Safe operation and minimum maintenance
●ATEX version available on request
●Made with all components in contact with the conveyed fluid in stainless steel (AISI 316 or DUPLEX), these blowers are resistant to corrosion and therefore suitable for use in heavy-duty applications such as evaporation processes and in the field of waste water treatment. Different configurations are available with various sealing systems such as lip and mechanical seal, and combinations of materials (stainless steel and cast iron), which allows the customer to select the most suitable solution, depending on the chemical composition and the type of system.
Products Basic Info.
Model :HLSR80 Rotating Speed:1140 - 2100 Rpm
Motor Power:2.2- 11Kw Driving Method:Belt and Coupling Drive
Net Weight:500 Kg Type of Technology:Positive Displacement Blowers
Medium:Air, Neutral Gases Color: Blue or Green
Certificate:ISO9001,CE Noise:Under 80dB
Trademark:HLSR Transport Package:Fumigation Free Plywood Case
Specification:DN80 Origin:China
HS Code:841459 Diameter:DN80
QUALITY Promise
Each model incorporates the following for longer service life and reduced downtime
• Every unit machine is fabricated under rigid ISO 9001:2015 quality standards
• Each Series is individually tested to meet rigorous performance specifications
• Warranty Period
– 12months from the date of shipment
• High strength impeller case for reduced noise and vibrations
• Integral heat dissipation fins on the case to help maintain proper clearances
• Oversized heavy-duty bearings for added overhung load capacity
Roots Blower Application
Widely used in sewage treatment, electric power, petroleum, chemical, fertilizer, steel, metallurgy,
oxygen, cement, food, textile, grade, dust and back blowing, aquaculture,
pneumatic conveying and other sectors.
Aeration process:
The aeration tanks in waste water treatment plants are activated with oxygen by using compressed air. Blower technologies can be found in various types of waste water treatment plants, including aerobic activated sludge systems, SBR, etc.
Selecting the proper blower should increase the plant’s efficiency and also use less energy. If you have a waste water treatment plant, our engineers can help you select the perfect blower for you.
Blower Structure Diagram
Material Indroduction
No. Name Material Q' ty No. Name Material Q' ty 1 Casting HT200 1 14 Z sealing ring Nitrile rubber 1 2 Lobe HT200 2 15 Gear 35CrM 2 3 Drive shaft 45Cr 1 16 Gear lock washer Q235 2 4 Driven shaft 45Cr 1 17 Gear lock nut SS400 2 5 Drive side siding HT200 1 18 Gearbox HT200 1 6 Gear side siding HT200 1 19 Sleeve 45 1 7 Drive bearing NSK or RENBEN 2 20 End cover Q235 2 8 Driven bearing NSK or RENBEN 2 21 Pin 45 1 9 Sealing ring Nitrile rubber 2 22 Plug 35 1 10 Sealing ring Nitrile rubber 2 23 Oil gauge 1 11 Bearing sleeve 45# 4 24 Vent 1 12 Bearing cover HT200 1 25 Grease nipple C3605 2 13 Bearing cover HT200 1 26 Gearbox seals Barley paper 2
Manufacture Technique
Factory Show:
Roots Blower Main Parts
Project Case
Certificate
Payment terms and Delivery
Payment: All the payment terms can be negotiated, generally by T/T or L/C.
Delivery:10-15 days after receipt of your payment.
Port: Qingdao,Shanghai;,Tianjin
FAQ
1. What's the information should I provide when inquiry?
A: Air capacity
B: Pressure
C: Application
D: Use environment(Temperature, atmospheric pressure)
E: Voltage, frequency, number of phases and speed of motor
Or other specials you give us will be more appreciated.
2. What is your warranty?
Our warranty is 12 months after received the roots blower. During the warranty period, replace the damaged parts for free of charge. Out warranty period, to provide timely, high-quality technical services and price concessions spare parts to ensure continuous safe and high-quality equipment operation.
3. How long is the service life of roots blower?
In normal use environment A- Service life of blower is more than 10 years.
B- Service life of Impeller is more than 60, 000 hours.
C- Service life of bearing is more than 50, 000 hours.
D- Service life of gear is more than 60, 000 hours.
4. What is your terms of packing?
A: Generally, blowers and silencers below 200mm diameter shall be packed in Fumigation Free Plywood Cases, main blowers above 200mm diameter shall be packed in iron pallets, and silencers shall be packed in Fumigation Free Plywood Case. If you have legally registered patent, we can pack the goods in your branded boxes after getting your authorization letters.
5. How does your factory control product quality?
We have quality inspection department. Before sending out product, we check each product. If there is quality problem, we will produce new one.
6. What are your terms of payment?
1. TT 50% AS THE ADVANCE PAYMENT AND TT 50% AFTER INSPECTION BEFORE SHIPPING.
2.100% IRREVOCABLE L/C AT STGHT.
Product Categories : Roots Blower > Roots Blower For Chemical Plant